Bottle Cap Boo Card

Click image to enlarge

Make a boo-tiful card with bottle caps!

Difficulty rating

• Required supplies:
• Adhesive: Fiskars Tape Runner
• Dimensional Adhesive: 1/16” Pop Dots
• Ink: Tsukineko, ink -Versamark
• Embossing Powder: PSX Black
• Card stock: White, Black, Orange
• Kraft Patterned Paper: DCWV The Fall Stack
• Cardstock Letter Stickers: DCWV The Fall Sticker Stack Sanding Block - ultra fine grit Pop Dots 1/16” thickness.
• Bottle Cap: Design originals, Tim Holtz Wiggle Eyes, 6mm QTY 2

Instructions (Print version)

1. Cut White Card stock 5 ½” x 8 ½”.  Fold in half to create a 4 ¼” X 5 ½” card.
2. Trim a piece of the patterned paper 4 ¼” x 5 ½”.  Texture the paper with the webbing Texture Template.  Then Sand the texture on the paper lightly to Scuff off the top layer of the paper to reveal the web.  Attach to the white card.
3. Take the bottle cap and cover the top with the Versamark.  Coat the top of the inked bottle cap with the black embossing powder, heat.  Repeat this process about three times to get the desired thickness that you would like.  Caution:  This will get really HOT, use tweezers when Heating Metal.  Set aside until the bottle cap has cooled.
4. Attach the two eyes on to the bottle cap.  Cut 4 long strips of the black paper and attach to the middle of the back of the bottle cap.  This will create the legs of the spider.  Bend the Legs to create joints.
5. Use the cardstock stickers to create the word BOO! on the white cardstock.  Layer then with black, and orange, use the kraft paper to create the stick of the sign.